TPS
Tarp
Systems

Easy to use
by a personnel
switch

Fixed point
with roller
pipe

Adjustable
to different
pallet heights

Tarp systems

The Tarp is manufactured from Trevira fabric with PVC coating and has fibreglass reinforcement bars to resist air pressure. The Tarp is fixed onto the suction wall with special guide tracks and rollers for adjustment to different pallet heights. This pressure roller secures the Tarp to follow the pallets and guides it to cover the pallets completely airtight. We advise placing our integrated and depressible foam buffers (100x100) on the suction wall to prevent air by-pass behind the pallets.

TARP RT - Ripening Tarp track system.
Fitted with a manual movable roller pipe in a rails system, electrically operated by single-phase 220V tube motor easy to use by a personnel switch.

TARP RF - Ripening Tarp Fixed point system. 
Fixed point with roller pipe on the ceiling of the room and electrically operated by 3-phase 400V/50Hz. Operator with fixed switch in front of the room.

TARP PT - Pre Cool Tarp track system.
Fitted with a manual movable roller pipe in a rails system, electrically operated by single-phase tube motor easy to operate using a personnel switch.

 

 TARP PF - Pre Cool Fixed point system. Fixed point with roller pipe at the ceiling of the room and electrically operated by single-phase tube motor. Operator with fixed switch in front of the room.

TARP PB - Pre Cool Box motor Fixed-point system. Fixed point with roller pipe at the ceiling of the room and electrically operated by 3-phase 400V/50Hz. Operator with fixed switch in front of the room.

TARP PW - Pre Cool Wall installed system. Wall installed with roller pipe and electrically operated single-phase 220V tube motor. Operated with supplied remote control and aluminium hand stick.

CHARACTERISTICS

Ripening

  • Curtain wide 3.000 mm.
  • Foam buffers 4 vertical, 1 Horizontal.

Pre Cooling

  • Curtain wide 1.500 mm.
  • Foam buffers 2 vertical, 1 Horizontal.
  • Tarp Type 1 we advise in case of many partial loads.

Tarp

PVC-coated fabric weight approx. 650 gr/m2 with reinforcements of glass fibre tubes at every fixed mm to resist the pressure difference.

Standard colour Tarp and Foam buffers

  • RAL 1003 Signal yellow
  • RAL 5015 Sky blue
  • RAL 5005 Signal blue
  • RAL 7038 Agate grey
  • RAL 5002 Marine blue
  • RAL 6026 Opal green
  • RAL 5013 Cobalt blue